14mz, Instruction manual • Read online or download PDF • Futaba 14MZ User Manual. Get Futaba 14MZ Manual. Get all Futaba manuals! 14MZ. 14 CHANNEL RADIO CONTROL SYSTEM. PCMG3/PCM/FM selectable. INSTRUCTION. Compact Flash (CF) Card Handling Instructions Follow these precautions when handling the CF card included in your 14MZ transmitter. DO NOT allow the.
|Published (Last):||6 May 2009|
|PDF File Size:||17.72 Mb|
|ePub File Size:||16.21 Mb|
|Price:||Free* [*Free Regsitration Required]|
A collapsed antenna will reduce your flying range and cause a loss of control. Mankal hold the antenna alone. How to majual the receiver from vibration and water Mounting servos Use a vibration-proof rubber such as rubber grommet under a servo when mounting the servo on a servo mount.
The throttle position can also be set to an idling position separate from the throttle cut position. The Timer function may be set for any desired time, i. Do not use any other chargers except CR that is for 12V application to charge the LT2F battery through this connector. You’ll find the answers to all your questions on the FUTABA 14MZ in the user manual information, specifications, safety advice, size, accessories, etc.
Clock This shows the today’s date and the current time. When you have a problem of saving or reading data such as picture data after a long period of use, please get a new CF card.
Then you will see the “Confirmation of the change” box. Turning the screw clockwise increases the tension. Use the attached jig inside stylus to turn the face nuts counterclockwise, this will detach the switches. Backlight power-off time You can set a time period to turn off the LCD backlight.
To print the manual completely, please, download it.
How to register user’s janual 1. PIT to RUD mixing Revolution mixing Use this mixing when you manula to suppress the reaction torque generated by main rotor pitch and speed changes at pitch operation. Page Operation modes The operation modes when stick, trim lever or VR are selected are described below. These dedicated mixings can be set for each flight condition, as required. It is not intended for use in any application other than the control of models for hobby and recreational purposes.
Display adjustment and auto power off setting. When Registration of the user’s name the frequency setting for the receiver is T14MZ transmitter can register user’s name.
FUTABA 14MZ Instruction Manual
The resolution iswhich is double the current PCM Fuselage linkage Connect the throttle rudder, ailerons, elevators, pitch, and other rudder linkages in manial with the kit instruction manual.
Snap Roll Snap Roll [Corresponding model type]: Any such changes may void the warranty.
Seven functions, and mixing functions for the chosen model swash types are available for helicopters. Have regular maintenance performed. Timer Timer setting and lap time display. Mabual the antenna to the full extent, and make sure that the antenna is securely locked before operation. To add new models or to call a model already set, use the Model Select function of the Linkage Menu.
Then push S1 and S4 keys simultaneously.
Throttle-stick Calibration Futaba 14MZ and FX40
Do not attempt to charge Li-Ion batteries with a charger that is NOT designed for Mnual batteries, as permanent damage to the battery and charger could result. We recommend you to turn off the backlight by setting the backlight manal time to about one minute. Snap Roll [Corresponding model type]: Throttle Mix Throttle mixing This function corrects slowing of engine When correction is necessary, touch the mixing speed caused by swash plate operation at aileron corresponding to the mixing that needs correction or elevator operation.
Slide the card cover on the right side of the transmitter back, and pull open the cover towards you. Futaba’s original CF cards. The internal circuit of the transmitter starts the shut down process including saving the set-up data.
Close the card cover and slide it to the original position. The switch including when stick, trim lever, or VR are used as a switch setting method is common to all functions.
Curve type selection When the curve type select button on the mixing function screen or manua screen is touched, the setup screen shown below is called.